Centre the winding. Check whether an inner ring is required. sales@ferrobend.com +91-8369719424

External location

Spiral Wound Gasket With Outer Ring

A spiral-wound sealing element held in an outer guide ring. The ring positions the assembly and helps control compression in a compatible joint.

Spiral Wound Gasket With Outer Ring, showing the winding and locating arrangement

THE CONSTRUCTION

External location.
A separate sealing element.

A solid outer ring surrounds the metal-and-filler winding. It provides an external locating boundary and compression-control function; the winding remains the active sealing element.

Raised-face and flat-face joints can use ring-guided arrangements where the flange design permits. An outer ring alone does not provide bore-side support: verify the specified inner-ring requirements before selection.

Compare all six configurations
ArrangementWinding + outer ring
Location / supportExternal centering
Design requirementInner-ring review required

TECHNICAL REFERENCE

Standards & material specifications

Match the construction, joint geometry and component materials.

Dimensions & joint requirements

Spiral Wound Gasket With Outer Ring dimensional and joint references
ASME B16.20Covered spiral-wound materials, dimensions, tolerances and marking. Match the referenced flange and required ring arrangement.
EN 1514-2Spiral-wound gaskets for covered PN-designated steel flange joints. Verify the flange and specified edition.
EN 12560-2Spiral-wound dimensions for covered Class-designated steel flange joints. Confirm the size, class and construction.

For ASME B16.20 pipe-flange gaskets, PTFE filler requires an inner ring. Graphite-filled gaskets normally include one unless the purchaser specifies otherwise; mandatory size/Class requirements still apply. Check the specified edition before selecting this outer-ring-only arrangement.

Component material requirements

Spiral Wound Gasket With Outer Ring material references
Metal windingFor a 316L stainless winding, specify UNS S31603 strip and the ordered material specification, such as ASTM A240/A240M. Select the filler separately.
Soft fillerFlexible graphite or PTFE are established options. Specify the actual grade and verify chemical compatibility, oxidation conditions and service limits.
Outer guide ringSpecify its grade and finish independently. Coated carbon steel and stainless steel are examples; the ring colour does not prove the winding alloy.

Material capability does not establish complete-joint capability. Confirm the standard edition, component marking and service conditions; illustration colours are not material identification. Construction references: Flexitallic selection guide · Teadit construction guide.

UNDERSTAND THE ARRANGEMENT

Construction details that matter.

Illustrative views of this configuration. Geometry, proportions and colours are schematic; use the specified standard or approved drawing.

Outer guide ring — Spiral Wound Gasket With Outer RingSchematic construction detail. Colour, proportions and any illustrated hole count do not specify a supplied gasket.Outer ringWinding
01 / Construction detail

Outer guide ring

The solid outer ring positions the winding relative to the flange. Its diameter must suit the actual bolt and flange arrangement.

Sealing element — Spiral Wound Gasket With Outer RingSchematic construction detail. Colour, proportions and any illustrated hole count do not specify a supplied gasket.Profiled metal + soft fillerOuter ringIllustrative uncompressed radial section
02 / Construction detail

Sealing element

The uncompressed winding stands above the guide ring. The specified assembly procedure controls seating; the illustration gives no compression ratio.

Inner-ring check — Spiral Wound Gasket With Outer RingSchematic construction detail. Colour, proportions and any illustrated hole count do not specify a supplied gasket.Outer ring onlyInner + outer ringsSelect the arrangement required by the joint
03 / Construction detail

Inner-ring check

Review whether bore-side support is required. Select the inner-and-outer-ring construction where the applicable standard or joint design calls for it.

Define the Right Spiral Wound Configuration

Share the flange or joint drawing, ring arrangement, component materials, service conditions and quantity.

Request a Quote