Specify the jacket. Select the filler. Shape the seal. sales@ferrobend.com +91-8369719424

Semi-Metallic / Metal Jacketed

Metal Jacketed Gaskets

A formed metal jacket and a compressible filler. Explore jacket constructions, material choices and the standards that define the joint.

Metal jacketed gasket examples showing circular, bolt-hole and partition-bar arrangements

THE CONSTRUCTION

Metal protection.
Compressible filling.

A metal jacket is formed around a filler, with the degree of enclosure set by the construction. The jacket supports the filler and forms part of the sealing surface. The filler provides compressibility.

Ring shapes, non-circular outlines and partition bars follow the joint drawing. For exchanger pass bars, specify their position, width and junction details along with the outer sealing ring.

ClassificationSemi-metallic when soft-filled
Specify separatelyJacket + filler
GeometryStandard or agreed drawing

TECHNICAL REFERENCE

Standards & material specifications

Match the construction and dimensions to the specified flange or equipment joint.

Applicable standards

Metal jacketed gasket standards and scope
ASME B16.20Metal-jacketed gasket materials, dimensions, tolerances and marking. Match the applicable ASME B16.5 or B16.47 flange and series.
EN 1514-4PN-designated flange dimensions for corrugated, flat or grooved metallic and filled metallic gaskets. Verify the specified gasket design and size range.
EN 1514-7EN 12560-7Covered metal-jacketed constructions with additional facing layers, for PN and Class flanges respectively. Check the covered design and flange standard.

EN Part 7 excludes pass-bar heat-exchanger and large-vessel gaskets from direct scope. Equipment-specific shapes require an agreed drawing and design review.

Materials & specification references

Metal jacket and filler specification guidance
Metal jacketSpecify alloy, thickness and condition. ASTM A240/A240M addresses suitable stainless plate, sheet and strip; ASTM B152/B152M addresses copper sheet and strip.
Soft fillerFlexible graphite is a common option. PTFE or ceramic-fibre fillers require service-specific selection. Specify grade, compatibility and finished thickness.
Joint conditionsConfirm fluid, pressure, temperature, flange finish and available bolt load together. A raw-material specification establishes requirements for the stock material.

Assembly limits require joint-specific verification. Confirm finished-gasket conformity separately from the jacket material specification.

EXPLORE THE CONSTRUCTIONS

Four ways to form the jacket.

Construction options within the metal-jacketed family. Illustrative sections show the enclosure and filler; confirm the final section against the standard or agreed drawing.

Single-Jacketed Gaskets sectionIllustrative cut section. A silver jacket covers one face and both edges. The opposite filler face is exposed.Exposed filler faceMetal jacketSoft filler
01 / One face + both edges

Single-Jacketed Gaskets

A formed metal jacket supports the filler on one face and both radial edges. The opposite filler face is exposed. Confirm the section and installation orientation.

Single-Jacketed Overlap Gaskets sectionIllustrative cut section. One metal shell folds around the filler, with an overlap seam at the top.Overlap seamMetal jacketSoft filler
02 / One-piece enclosure

Single-Jacketed Overlap Gaskets

An overlapping fold closes the remaining face so one metal piece encloses the filler. Specify the overlap position and finished thickness on the drawing.

Double-Jacketed Gaskets sectionIllustrative cut section. A separate metal cover closes the formed shell above the soft filler.Separate coverMetal jacketSoft filler
03 / Two-piece enclosure

Double-Jacketed Gaskets

A formed shell covers one face and both edges. A separate metal cover closes the other face, enclosing the soft filler within a two-piece jacket.

Corrugated Double-Jacketed Gaskets sectionIllustrative cut section. Two corrugated metal jacket faces enclose the hatched soft filler.Corrugated jacketMetal jacketSoft filler
04 / Corrugated jacket

Corrugated Double-Jacketed Gaskets

A double-jacketed construction with corrugated sealing faces. Confirm the corrugation geometry, filler and seating load for the joint.

Need a Metal Jacketed Gasket for Your Application?

Share the drawing, dimensions, jacket and filler materials, service conditions and quantity.

Request a Quote