Support the bore. Match the winding to the designed recess. sales@ferrobend.com +91-8369719424

Bore-side support

Spiral Wound Gasket With Inner Ring

A spiral-wound sealing element reinforced at its bore by a solid inner ring. The flange must still provide external location and suitable compression control.

Spiral Wound Gasket With Inner Ring, showing the winding and locating arrangement

THE CONSTRUCTION

Bore reinforcement.
Joint-controlled location.

The inner ring sits inside the spiral-wound sealing element and supports its bore-side edge. This arrangement has no continuous outer guide ring.

It is used in compatible recessed or male-and-female joints when specified by the joint designer. The inner ring does not replace external locating geometry or make an unsuitable flange compatible.

Compare all six configurations
ArrangementWinding + inner ring
Location / supportBore-side support
Design requirementNo outer guide ring

TECHNICAL REFERENCE

Standards & material specifications

Match the construction, joint geometry and component materials.

Dimensions & joint requirements

Spiral Wound Gasket With Inner Ring dimensional and joint references
Approved joint drawingDefine inner-ring bore, winding ID/OD, component thicknesses and the mating recess geometry.
ASME B16.20Specify relevant winding requirements alongside the recessed-joint drawing. The standard is not a universal dimensional reference for inner-ring-only assemblies.
Seat & clearanceConfirm support, alignment and clearance for both the inner ring and winding. Review the joint compression stop.

Bore-side support helps resist inward winding movement. It does not establish a universal pressure, temperature or chemical-resistance rating.

Component material requirements

Spiral Wound Gasket With Inner Ring material references
Metal windingFor a 316L stainless winding, specify UNS S31603 strip and the ordered material specification, such as ASTM A240/A240M. Select the filler separately.
Soft fillerFlexible graphite or PTFE are established options. Specify the actual grade and verify chemical compatibility, oxidation conditions and service limits.
Inner support ringSpecify the process-compatible alloy separately from the winding. Confirm bore diameter, material condition and required identification.

Material capability does not establish complete-joint capability. Confirm the standard edition, component marking and service conditions; illustration colours are not material identification. Construction references: Flexitallic selection guide · Teadit construction guide.

UNDERSTAND THE ARRANGEMENT

Construction details that matter.

Illustrative views of this configuration. Geometry, proportions and colours are schematic; use the specified standard or approved drawing.

Bore-side ring — Spiral Wound Gasket With Inner RingSchematic construction detail. Colour, proportions and any illustrated hole count do not specify a supplied gasket.Inner ringWinding
01 / Construction detail

Bore-side ring

The solid inner ring supports the winding at the bore. Select its diameter and material for the actual joint and process.

Ring-and-winding section — Spiral Wound Gasket With Inner RingSchematic construction detail. Colour, proportions and any illustrated hole count do not specify a supplied gasket.Profiled metal + soft fillerInner ringIllustrative uncompressed radial section
02 / Construction detail

Ring-and-winding section

The inner ring is a solid component beside the wound sealing element. Specify the two component materials and thicknesses separately.

Recess fit — Spiral Wound Gasket With Inner RingSchematic construction detail. Colour, proportions and any illustrated hole count do not specify a supplied gasket.Illustrative seated jointJoint geometry controls location
03 / Construction detail

Recess fit

The mating flange still provides external location. Confirm recess width, depth, clearances and the intended seated condition.

Define the Right Spiral Wound Configuration

Share the flange or joint drawing, ring arrangement, component materials, service conditions and quantity.

Request a Quote