Match the bolt pattern. Keep the holes clear of the sealing winding. sales@ferrobend.com +91-8369719424

Drawing-specific drilled carrier

Spiral Wound Gasket With Bolt Holes

A spiral-wound sealing element located in a drilled carrier or outer ring. Define the bolt pattern and all sealing dimensions from the equipment drawing.

Spiral Wound Gasket With Bolt Holes, showing the winding and locating arrangement

THE CONSTRUCTION

Drilled carrier.
A separate wound seal.

Bolt holes are formed in the surrounding carrier or extended outer ring, outside the wound sealing element. The hole pattern helps fit the assembly to its intended equipment.

Specify the ring arrangement separately: bolt holes do not by themselves determine whether an inner ring is fitted. The illustrated assembly includes an inner ring, which must be checked against the approved joint design.

Compare all six configurations
ArrangementDrilled carrier / outer ring
Location / supportDrawing-controlled bolt pattern
Design requirementWinding remains undrilled

TECHNICAL REFERENCE

Standards & material specifications

Match the construction, joint geometry and component materials.

Dimensions & joint requirements

Spiral Wound Gasket With Bolt Holes dimensional and joint references
Approved joint drawingControls carrier OD, bolt-hole count and diameter, pitch-circle diameter, clocking, tolerances and sealing dimensions.
ASME B16.20Relevant standard winding/ring requirements may be specified. A custom drilled carrier is not automatically an ASME standard dimensional configuration.
Flange / equipment referenceMatch the actual mating flange or equipment drawing. Verify bolt clearance, sealing-face support and compression control.

Do not drill the spiral-wound element or infer an operating rating from a bolt pattern. The complete gasket and equipment geometry require review.

Component material requirements

Spiral Wound Gasket With Bolt Holes material references
Metal windingFor a 316L stainless winding, specify UNS S31603 strip and the ordered material specification, such as ASTM A240/A240M. Select the filler separately.
Soft fillerFlexible graphite or PTFE are established options. Specify the actual grade and verify chemical compatibility, oxidation conditions and service limits.
Carrier & support ringsSpecify carrier grade, thickness and finish, plus the inner-ring grade where fitted. Review corrosion and assembly requirements separately from the winding.

Material capability does not establish complete-joint capability. Confirm the standard edition, component marking and service conditions; illustration colours are not material identification. Construction references: Flexitallic selection guide · Teadit construction guide.

UNDERSTAND THE ARRANGEMENT

Construction details that matter.

Illustrative views of this configuration. Geometry, proportions and colours are schematic; use the specified standard or approved drawing.

Drilled carrier — Spiral Wound Gasket With Bolt HolesSchematic construction detail. Colour, proportions and any illustrated hole count do not specify a supplied gasket.Drilled carrierWound seal
01 / Construction detail

Drilled carrier

Holes are located in the carrier outside the active seal. Keep the winding clear of the bolt-hole pattern.

Separate sealing element — Spiral Wound Gasket With Bolt HolesSchematic construction detail. Colour, proportions and any illustrated hole count do not specify a supplied gasket.Profiled metal + soft fillerInner ringCarrier / outer ringIllustrative uncompressed radial section
02 / Construction detail

Separate sealing element

The wound seal, inner support ring where fitted, and drilled carrier are distinct components with distinct functions.

Bolt pattern — Spiral Wound Gasket With Bolt HolesSchematic construction detail. Colour, proportions and any illustrated hole count do not specify a supplied gasket.Hole diameterPitch circleCount, clocking and dimensions from drawing
03 / Construction detail

Bolt pattern

Confirm hole count, diameter, pitch circle and angular orientation. The illustrated count is an example, not a supplied-product specification.

Define the Right Spiral Wound Configuration

Share the flange or joint drawing, ring arrangement, component materials, service conditions and quantity.

Request a Quote