Define the ring pair, flange attachment and closure weld. sales@ferrobend.com +91-8369719424

Metallic / Weld profile

Weld Ring Gasket

A paired metal sealing system welded to the flanges and closed by a joining weld. Select the profile, materials and welding requirements as one assembly.

Weld Ring Gasket product illustration

THE CONSTRUCTION

Two rings. A welded closure.

A weld-ring seal uses a pair of metal rings: one is attached to each flange, and the rings are welded to one another to close the sealing path. It is a welded system rather than a conventional loose compression gasket.

Access, differential movement and future opening need consideration during joint design. Removal may require cutting and subsequent qualified repair. Do not assume unrestricted reuse.

ClassificationMetallic
ConstructionWelded ring pair
SpecificationStandard or approved drawing

TECHNICAL REFERENCE

Standards & material specifications

Specify the joint reference, profile and material condition together.

Dimensions & joint requirements

Weld Ring Gasket dimensional and joint references
DIN 2695:2021-06Covers diaphragm-weld packings and weld ring seals for flange connections. Verify the selected seal type and applicable flange scope.
Joint & weld drawingDefine the ring pair, flange attachment and closure weld, including preparation, dimensions and inspection access.
Welding requirementsThe applicable equipment code and approved procedure govern welding qualification, consumables, examination and acceptance.

Reference standards apply only within their scope. Dimensional conformity alone does not demonstrate sealing suitability or certify a supplied product.

Material specification references

Weld Ring Gasket material requirements
ASTM A240/A240MA raw-material reference for stainless plate, sheet and strip. Specify the grade and delivery condition separately.
Weld compatibilitySelect ring and weld-metal grades compatible with the flange materials, fluid and service conditions.
Material conditionSpecify product form, heat treatment and required records. Review weldability and any post-weld treatment with the equipment designer.

Raw-material compliance does not establish assembly pressure or temperature limits. Confirm the specified edition and service requirements.

UNDERSTAND THE PROFILE

The details that define the joint.

Three specification details within this gasket family. Illustrations are schematic and not to scale.

Ring pair — Weld Ring GasketIllustrative ring pair view. The highlighted geometry corresponds to the specification detail explained below; dimensions and colours are schematic.Ring ARing BMatched pair shown before closure
01 / Profile detail

Ring pair

One ring attaches to each flange. Check matched dimensions and alignment before attachment.

Flange attachment — Weld Ring GasketIllustrative flange attachment view. The highlighted geometry corresponds to the specification detail explained below; dimensions and colours are schematic.Flange attachment weldsOne ring on each flange
02 / Profile detail

Flange attachment

The approved drawing must identify where and how each ring is welded to its flange.

Closure weld — Weld Ring GasketIllustrative closure weld view. The highlighted geometry corresponds to the specification detail explained below; dimensions and colours are schematic.Ring-to-ring closure weldPaired sealing edges
03 / Profile detail

Closure weld

Join the paired edges using the specified procedure, followed by the required inspection and leak test.

Specify Your Weld Ring Gasket

Share the joint drawing or standard, dimensions, alloy, operating conditions and quantity.

Request a Quote