Match the lens profile to the designed seating surfaces. sales@ferrobend.com +91-8369719424

Metallic / Lens profile

Lens Ring Gasket

A solid metal sealing ring with curved lens contact surfaces. Match the ring dimensions and mating seats to the specified flange connection.

Lens Ring Gasket product illustration

THE CONSTRUCTION

Curved contact. Matched conical seats.

A lens ring gasket seals through its curved contact surfaces against the matching conical seating surfaces of the joint. The profile and seat geometry are designed together.

It is not an oval or octagonal RTJ ring. Confirm the lens radius, ring dimensions and seating details from the specified standard or approved drawing.

ClassificationMetallic
ConstructionBare metal profile
SpecificationStandard or approved drawing

TECHNICAL REFERENCE

Standards & material specifications

Specify the joint reference, profile and material condition together.

Dimensions & joint requirements

Lens Ring Gasket dimensional and joint references
DIN 2696:2021-06Flange connections with lens-shaped gaskets. Covers lens and seating geometry for specified EN 1092-1 flange connections within its scope.
Standard scopeCheck flange type, DN, PN and edition. A nominal flange designation is not a universal operating-pressure rating.
Nonstandard jointsUse an approved drawing outside the standard. Do not assume interchangeability with older or custom profiles.

Reference standards apply only within their scope. Dimensional conformity alone does not demonstrate sealing suitability or certify a supplied product.

Material specification references

Lens Ring Gasket material requirements
ASTM A240/A240MA raw-material reference for stainless plate, sheet and strip. Specify the grade and delivery condition separately.
ASTM A276/A276MA raw-material reference for stainless bars and shapes. Applicability depends on the stock form and ordered condition.
Finished lensSpecify alloy, hardness/condition, contact radius and surface finish. Verify compatibility with the seats and required contact load.

Raw-material compliance does not establish assembly pressure or temperature limits. Confirm the specified edition and service requirements.

UNDERSTAND THE PROFILE

The details that define the joint.

Three specification details within this gasket family. Illustrations are schematic and not to scale.

Lens profile — Lens Ring GasketIllustrative lens profile view. The highlighted geometry corresponds to the specification detail explained below; dimensions and colours are schematic.Curved contact facesLens ring + enlarged local section
01 / Profile detail

Lens profile

Curvature defines the contact. Specify curved sealing surfaces and section dimensions together.

Conical seats — Lens Ring GasketIllustrative conical seats view. The highlighted geometry corresponds to the specification detail explained below; dimensions and colours are schematic.Upper conical seatLower conical seatContact
02 / Profile detail

Conical seats

Both seating surfaces must match the prescribed lens geometry, alignment and finish.

Dimensional match — Lens Ring GasketIllustrative dimensional match view. The highlighted geometry corresponds to the specification detail explained below; dimensions and colours are schematic.Section widthHeightContact radiusVerify ring and seat geometry together
03 / Profile detail

Dimensional match

Check ring diameters, height, contact radius and seating geometry against the same specified reference.

Specify Your Lens Ring Gasket

Share the joint drawing or standard, dimensions, alloy, operating conditions and quantity.

Request a Quote